Operation And Button Functions; Light Button - Klarstein VINSIDER 30 UNO Bedienungsanleitung

OPERATION AND BUTTON FUNCTIONS

Please use the wine refrigerator within an ambient temperature of 16-32 °C. If the
ambient temperature is higher or lower, this will cause temperature fluctuations in
the wine refrigerator and affect its performance.
Child safety lock
To activate the child lock, press and hold both buttons for
3 seconds. The same applies if you want to deactivate the child
lock again.
Switching button
Press and hold both buttons for 3 seconds to switch between
°C to °F. The same applies if you want to switch from °F to °C.
Press the (+) or (-) buttons individually to set the temperature.
Then wait 5 seconds without touching the display and the set
temperature is automatically applied.
Power button
In the power on state, press and hold the button for 3 seconds
to switch to standby mode. If the wine cooler is in standby mode,
press the button once briefly and the wine cooler will start with
the previously made settings.

Light button

Press the button to switch the light in the wine refrigerator on or
off permanently. When the refrigerator door is opened, the light
comes on automatically.
EN
29