Control Panel And Key Functions - Klarstein First Class 36 Bedienungsanleitung

EN
22

CONTROL PANEL AND KEY FUNCTIONS

SET TEMP Press the arrow keys to increase or decrease the temperature.
°C/°F Press the button for 3 seconds to toggle between °C and °F display.
OFF/ON Press the button to turn the wine refrigerator on or off.
LAMP Press the button to turn the LED light on or off.
STRENGTH Press the button to adjust the intensity of the LED light.
COLOR Press the button to adjust the color of the LED illumination.
When the compressor is turned on, the run icon lights up at the top left
of the display.
When the temperature in the wine refrigerator is below the set
temperature, the heat compensation system of the wine cooler starts to
operate and the two symbols light up at the bottom right of the display.
The left display shows the set temperature. The temperature can be set between 5-22°C.
The right display shows the actual temperature inside the wine refrigerator (0-37°C).
Use the SET TEMP buttons to reset the temperature inside the wine refrigerator at
any time. Once you have set a new temperature that is below the current interior
temperature, the interior is cooled down until the set temperature (±2°C) is reached.
Note: In case of power failure or interruption during normal operation, the set
temperature will be stored.