Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A. Front view / display
A1 – PM icon
A3 – Sound sensor
B. Back view / buttons and parts
B1 – - / DOWN button
B3 – + / UP button
B5 – Battery compartment
B7 – DC power socket
B9 – 3- meter white power cable
B11 – AC power socket
To power the clock
Plug in the 5V-1.2A AC/DC adaptor HX075B-0501200-AG-001 (included) to an AC wall outlet
and then the DC jack to the DC power socket on the back of your clock.
To install back-up batteries
Your clock requires 1 x CR2032 battery (not included) to provide backup power to it in the event of
a temporary power interruption.
1. Place your clock face down on a flat and soft surface.
2. Use a coin to turn the battery cover anti-clockwise at the back of your unit.
3. Insert one new lithium cell "CR2032" battery into the battery compartment by observing the "+"
polarity facing upward.
4. Replace the battery cover and turn clockwise to lock it.
If AC power is interrupted and backup batteries are being used, the time and all settings of your
unit will be kept. The mood light does not function and the time display does not light up.
Wall mounting
Stand
Slide down the stand and flip it into the desired direction. Insert it back into the opening on the
lower part of the clock until you hear a click sound. The stand is now safely secured.
A2 – Time
B2 – SET button
B4 – Display brightness rotary dial
B6 – Mood light brightness rotary dial
B8 – Stand
B10 – AC/DC power adapter
Table standing
Stand
EN2
Werbung
