Explanation Of Symbols Used; Technical Data - MACHEREY-NAGEL NANOCOLOR VIS II Bedienungsanleitung

Explanation of symbols used:

This symbol indicates that there is a hazard due to electrical shock.
This symbol indicates that the chemicals used have a corrosive effect. Follow the
safety measures in the laboratory and wear the required protective equipment.
Observe the information in the current safety data sheets (SDS) of the products
used.
This symbol indicates that there is a hazard due to the use of flammable
materials.
Identifies a hazard due to laser radiation.
Explanations about the text. Tips and tricks to work better.
USB interface
On/Off
LAN LAN interface
COM Serial (RS232) interface
SDHC SDHC card slot
CE denotes compliance with the applicable harmonization legislation of the
European Community.
DC voltage (12 V; 3.5 A)
In accordance with 2012/19/EU, disposal of the device via public waste disposal
systems is not permissible. See the section on disposal.
Manufacturer

Technical data

Specification
Type:
Light sources:
Optical system:
Wavelength range:
Wavelength accuracy:
Wavelength resolution:
Wavelength calibration:
Quickstart Guide NANOCOLOR
NANOCOLOR /
® UV
VIS
Spectrophotometer with reference detector technology (RDT)
Halogen lamp
(visible range)
Deuterium lamp (UV range)
Monochromator
190 – 1100 nm
± 1 nm
0.1 nm
Automatic
II NANOCOLOR
Halogen lamp
320 – 1100 nm
/ II / VIS II V 2.00/09‑2022
® UV
VIS
VIS II
®
5