NARDA FieldMan Kurzbedienungsanleitung Seite 30

2 Connection and commissioning
2.5.4 Select the country of use
(for WiFi/Bluetooth option)
If the WiFi/Bluetooth option is available, a selection list of countries for which a radio
license exists appears during initial commissioning and after a factory reset. Then select
the country in which the device will be operated. The country selection configures the
radio module for this region and selects the corresponding radio standard.
The device may only be operated with the correct country setting! Operating the radio
module in non-listed countries is not allowed.
Select the country of use:
✓ The device is being operated for the first time or a factory reset has been performed.
⇒
On the start screen, select the country of use from the drop-down menu and confirm
with OK.
Changing the country setting at a later date:
A factory reset must be performed for this purpose.
1. Press SK4 to open the device settings.
2. Perform the reset under GENERAL SETTINGS > DEVICE > Factory Reset.
3. On the start screen, select the country of use from the drop-down menu and confirm
with OK.
30
FieldMan Narda