Harken WINGMAN IN404 Bedienungsanleitung Seite 6

3. Product Description and Components (Continued)
g) Labeling - Double pulley with side becket
1 - Maximum rated load
Refers to the max rated
load at 4:1 mechanical
advantage.
Haul/tailing rope
2 - Minimum breaking strength
3 - Serial number
4 - Certification: Double pulley with side becket
5 - Certification: Entire system
6 - Manufacturer/address
g) Labeling - Double pulley with releasing cam
7 - Required rope diameter
FOR PROTOTYPING PURPOSES ONLY
VARIOUS
MATERIAL:
-
FINISH:
© The designs, constructions, arrangements, disclosures and devices
h) Dimensions
illustrated in presentations bearing this note are the property of Harken, Inc,
Pewaukee, WI and are submitted in confidence with the understanding
Minimum distance - The distance below is
that such material shall not be utilized in any way by any party without prior
CHAMFER -
the minimum distance the WingMan can close.
-
SURFACE FINISH: -
-
6
3kN MRL
0000
EN12278.2007
S/N:
ROPE
1
Ø8mm
NFPA 2500 (1983),
3kN MRL
2022 ED.
2
MBS: 45kN
FOR PROTOTYPING PURPOSES O
DOUBLE BECKET BLOCK
LOAD TENDER
DOUBLE BECKET BLOCK
VARIOUS
MATERIAL:
-
FINISH:
written consent from Harken, Inc.
© The designs, constructions, arrangements, disclosures and devices
illustrated in presentations bearing this note are the property of Harken, Inc,
Pewaukee, WI and are submitted in confidence with the understanding
that such material shall not be utilized in any way by any party without prior
written consent from Harken, Inc.
3kN MRL
0000
2821 0843
0000 0000
EN12278.2007
xxxx
S/N:
ROPE
Ø8mm
|
G
NFPA 2500 (1983),
|
3kN MRL
2022 ED.
MBS: 45kN
LOAD TENDER
8" (200 mm)
WingMan
3
4
5
G
7
DRAWING NUMBER
H-86666
-
PART #
1/1
SHEET NUMBER:
JDM
DESIGN BY :
ORLY
DRAWN BY :
CJL
ENG. APR :
MGK
MFG. APR :
Minimum distance
6
REV.
0
DRAWING NUMBER
H-86666
1:1
SCALE:
-
9/9/2021
PART #
DATE:
9/10/2021
DATE:
1/1
SHEET NUMBER:
9/24/2021
DATE:
JDM
DESIGN BY :
10/15/2021
DATE:
ORLY
DRAWN BY :
CJL
ENG. APR :
MGK
MFG. APR :
SCALE:
DATE:
DATE:
DATE:
DATE: