Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switching off
− Press the
button to switch off the device.
"off" is shown on the display.
Radio operation
1. Switch on the radio alarm clock and select FM as the audio source.
2. Press the
received in stereo quality, "ST" is also shown in the display.
3. If necessary, improve the radio reception by first setting a different frequency. Turn
the
button to set the frequency very precisely. If this does not work,
change the position of the wire antenna.
Refer to the chapter "Basic functions" for further information.
Playback via USB/micro SD
General information
‚ Playback via USB and micro SD card works identically and is therefore described
together.
‚ The radio alarm clock supports various audio formats, such as MP3, WAV or FLAC.
‚ The audio files can be located directly on the data storage device ("flat") or in
directories, where the directories should preferably not contain any sub-directories.
‚ The slot for the micro SD card is located in the battery compartment.
− Insert: Slide the card to the bottom as shown.
− Remove: Push the card slightly into the slot. The card is then pushed out by
spring force.
‚ Use a USB stick, not a USB disk.
Playback
1. Connect the USB stick or insert the micro SD card into the card slot.
2. Switch on the radio alarm clock and select USB or SD as the audio source.
Playback starts automatically.
− Pause and restart playback: Press the
− Select next track: Turn
− Select previous track: Turn
Refer to the chapter "Basic functions" for further information.
Radio alarm clock CK 1706
button repeatedly to set the desired radio station. If a station is
towards
towards
button.
.
.
Radio operation
33
Werbung
Inhaltsverzeichnis
