Switching Between Summer And Winter Time; Restart Radio Transmission; Set The Time Manually; Resetting The Clock To Factory Settings - ADE CK 1604 Bedienungsanleitung

Use

Switching between summer and winter time

Switching between summer and winter time, or vice versa, takes place automatically
with good time signal reception.

Restart radio transmission

3. Press and hold the REC button for a few seconds.
4. Release the button when the clock hands begin to turn.
The radio wall clock then indicates "12 o'clock".
The clock then attempts to receive a radio signal within the next minutes.
‚ If the clock receives a sufficiently strong radio signal, the hands set themselves to
the correct time.
‚ If the clock does not receive a sufficiently strong radio signal, it resets itself to the
previously indicated time.

Set the time manually

If the clock is located out of range of a transmitter or radio signal reception is not
possible, you can set the time manually.
1. Press and hold the M.SET button. The hands begin to turn.
2. Release the button shortly before the correct time is indicated.
3. Briefly and repeatedly press the M.SET button in order to set the clock to the correct
time. With each tap the time is set forward by one minute.
When M.SET is not pressed for 8 seconds, the currently set time is stored
and you have to repeat the process.

Resetting the clock to factory settings

If the incorrect time is repeatedly indicated, you can reset the clock to factory settings
(reset function). A reset is required only in exceptional cases.
− Using a thin object (e.g. an unwound paperclip) press down on the RESET button.
The clock hands turn to 12:00 o'clock, the clock then switches to receiving mode.
18
Radio Wall Clock CK 1604