Playback Via Bluetooth; Pairing The Radio Alarm Clock With A Bluetooth® Device; Playback; Making Calls During Playback - ADE CK 1706 Bedienungsanleitung

Playback via Bluetooth®
Playback via Bluetooth®
‚ Refer to the operating manual of your mobile device.
‚ The Bluetooth® range is a maximum of 10 metres.
‚ There must be no plug inserted in the AUX port.
Pairing the radio alarm clock with a Bluetooth® device
1. Switch on the radio alarm clock and select BT as the audio source.
The Bluetooth® icon flashes in the display.
2. Switch on your mobile device (smartphone, tablet PC, etc.).
3. Enable the Bluetooth® function on your mobile device.
4. Start the device search on your mobile device.
5. Select "P1"from the list and connect the devices.
A beep sounds and the Bluetooth® icon is displayed continuously.

Playback

1. Start playback by enabling the corresponding function on your mobile device.
2. The other functions (track selection, pause playback, etc.) can be set on the radio
alarm clock or on the mobile device.
Operation on the radio alarm clock:
− Pause and restart playback: Press the
− Select next track: Turn
− Select previous track: Turn

Making calls during playback

If you are called on your smartphone during Bluetooth playback:
1. Press the multi-function knob.
2. Now talk to the caller via the microphone of the radio alarm clock.
The microphone is located on the bottom right of the front side.
3. End the call by pressing the multi-function knob again.
Disconnecting the Bluetooth® connection
Only one device at a time can be connected to the radio alarm clock via Bluetooth®. If
you want to pair another device, first disconnect an existing connection by turning off
the Bluetooth® connection on the mobile device.
Refer to the chapter "Basic functions" for further information.
34
button.
towards .
towards .
Radio alarm clock CK 1706