Using Set Menu; Sound Menu - Yamaha RX-V557 Bedienungsanleitung

Using SET MENU

Use the remote control to access and adjust each
parameter.
VCR
TV VOL TV CH
TV MUTE TV INPUT
STEREO MUSIC
1 2
STANDARD SELECT
5 6
A SPEAKERS B
9 0
LEVEL
TITLE
RETURN
REC
y
You can change SET MENU parameters while the unit is
reproducing sound.
Note
You cannot change some SET MENU parameters while the unit
is in either cinema or music night listening mode.
1
Press AMP.
2
Press SET MENU.
"BASIC SETUP" appears in the front panel display.
3
Press u / d to display MANUAL SETUP.
MANUAL SETUP
4
Press ENTER to enter MANUAL SETUP.
1 SOUND MENU appears in the front panel display.

1 SOUND MENU

5
Press u / d to display the desired menu.
1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
AMP
1
VOLUME
MUTE
ENTERTAIN MOVIE
3 4
EXTD SUR. DIRECT ST.
7 8
NIGHT STRAIGHT
10 ENT.
EFFECT
PRESET/CH
SET MENU 2,8
MENU
ENTER
A/B/C/D/E
DISPLAY
3-7
AUDIO
6
Press ENTER to enter the displayed menu.
Repeat steps 5 and 6 to navigate to and enter the items
you want to adjust.
To return to the previous menu level, press RETURN.
7
Press u / d and ENTER to select the
submenu, then press u / d to select the item
and j / i to change the parameter.
Repeat this operation to select and adjust each setting.
To return to the previous menu level, press RETURN.
8
To exit, press SET MENU when finished.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
SET MENU
49