Audio Stream Quality; Internet Settings - Medion P66400 Bedienungsanleitung

 Press YES to confirm the subsequent prompt and to store the sound format.

28.2. Audio stream quality

You can configure the corresponding settings under the STREAMING AUDIO
QUALITY menu to improve the streaming quality.
 Select STREAMING AUDIO QUALITY and then press SELECT to confirm.
 Next, set your preferred streaming quality (LOW, NORMAL or HIGH
QUALITY) using the volume control dial or the
control and press SELECT to confirm.
To avoid interruptions and failure during playback, only select HIGH
QUALITY when there is a fast internet connection.

28.3. Internet settings

Configure the internet settings under NETWORK.
28.3.1. Network wizard
 Select NETWORK WIZARD to start searching for networks.
 Then connect the internet radio to your preferred network as described in
section "13.3. Establishing a connection to a network" on page 340 onwards.
28.3.2. Establishing a WPS connection
You can establish a WPS connection under PBC WLAN SETUP:
 Activate the WPS connection on the device that supports WPS and then confirm
the connection on the internet radio by pressing the SELECT button on the
remote control.
28.3.3. Displaying settings
Information about the currently connected network and the device's MAC address is
displayed under VIEW SETTINGS.
28.3.4. Manual settings
 Under MANUAL SETTINGS, select wireless connection (WLAN) and set the
DHCP function to ON or OFF.
 Next, enter the SSID of the wireless network using the number/character
buttons on the remote control. Select SELECT and press SELECT on the remote
control to apply the SSID.
 Next, select the encryption of your network (OPEN, WEP, WPA/WPA2). Press
SELECT on the remote control to confirm your selection.
 Select the type of encoding by pressing SELECT on the remote control.
buttons on the remote
DE
FR
NL
ES
IT
EN
359