Search Settings; Audio Setting; Automatic Station Search; Playing Back Cds - Medion P66400 Bedienungsanleitung

18.3.1. Search settings

Under SCAN SETTING, confirm the prompt STRONG
STATIONS ONLY? with YES for the radio to search only for stations with a strong
signal.
NO for the radio to also search for stations with a weak signal.
•

18.3.2. Audio setting

Under AUDIO SETTING, confirm the prompt LISTEN IN MONO
ONLY? with
YES to play radio stations in mono. Use this setting when there is weak
•
reception.
NO to play radio stations in stereo.
•

18.3.3. Automatic station search

Under AUTOMATIC STATION SEARCH, confirm the prompt AUTOMATIC
STATION SEARCH with
YES to automatically search for radio stations and to save these to the memory
•
slots.
NO when no search is to be performed.
•
Stored stations are overwritten or deleted without any further warning.

19. Playing back CDs

 Press the
button or press

19.1. Track information (ID3)

If the CD contains tracks with ID3 information, press INFO while a track is playing to
display this information about the tracks one after the other. You will see the track,
artist and album name on the display.

19.2. Inserting/removing a disc

Ensure there is approximately 15 cm of space in front of the device so that the CD
can be ejected easily.
 Press the
button on the device or on the remote control to open the CD tray.
OPEN will appear on the display.
 Always place the CD in the disc tray with the labelled side facing upwards.
 Press
on the device again to close the CD tray. LOADING will appear on the
display.
The total number of tracks on the CD and the total running time are displayed. The
first track then starts playing automatically.
If no disc is inserted, or if the disc cannot be read, the display reads NO CD.
348
and use the dial (7) to select CD.