Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Start up
6.1
Simple operating functions on the device
You can operate the actuator immediately with the channel
button (teaching is not required) and check for correct electrical
installation. The button is used like an ON/OFF toggle switch.
Only the brief button press is used for operation. The
longer button press (longer than 4 seconds) switches the
actuator to teach mode.
6.2
Teaching
Please read this section completely before starting with any
teaching!
Both devices to be connected are set to teach mode for teaching.
The actuators have no special teach button. Hold the channel
button on the actuator for at least 4 seconds for teaching. Teach
mode is indicated by the device LED flashing continuously.
If no teaching occurs, teach mode is automatically ended after
20 seconds. If other devices are in teach mode, these are taught.
18
Werbung
Kapitel
Inhaltsverzeichnis
