Appliance Description - STIEBEL ELTRON FEB Bedienung Und Installation

OPERATION | INSTALLATION

Appliance description

- The qualified contractor is responsible for adherence
to all applicable regulations during installation and
commissioning.
- The appliance should only be operated once it is fully in-
stalled and all safety equipment has been fitted.
- Protect the appliance from dust and dirt during building
work.
2.3 Test mark
See type plate on the appliance.
3. Appliance description
The programming unit enables convenient operation and the dis-
play of system parameters from the living space. Communication
is via i²C bus. Installation on a surface box.
4. Operation
See the operating instructions for the ventilation unit for infor-
mation on operation.
Note
This programming unit has a menu structure with plain
text parameter names. If your main appliance had pa-
rameter numbers before this programming unit was
connected, read the current operating instructions on
our website.
f Enter the part number of your main appliance in the
search field on our website.
5. Troubleshooting
If the selected time programs have been deleted, this may be
due to the replacement of the programming unit. Set the time
program.
www.stiebel-eltron.com
INSTALLATION
6. Safety
Only a qualified contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
6.1 General safety instructions
We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the device are
used.
6.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
7. Appliance description
Note
Programming units with parameter names and program-
ming units with parameter numbers cannot be combined.
f Replace programming units with parameter num-
bers with programming units with parameter
names.
A
Standard delivery
- Fixing materials
8. Preparation
Installation site
The length of the bus cable between the programming unit and
ventilation unit must not exceed 20 m.
Observe the following installation location requirements to ensure
correct function.
f Fit the appliance to an internal wall, but not in a recess.
f Never cover the appliance with curtains, etc.
f Ensure the device is not directly exposed to external heat
sources (e.g. the sun, central heating or a TV set).
f Avoid direct draughts coming from windows and doors.
9. Installation
For installation, remove the appliance from the wall mounted
enclosure:
B
f Release the locking tab found in the opening on the under-
side of the wall mounted enclosure. Press the locking tab
with a screwdriver.
FEB | 9