Selecting A Saved Station - Silvercrest SWEP 500 A1 Bedienungsanleitung

GB/CY

Selecting a saved station

• In order to select a saved station directly, first use the frequency selection
switch to select the frequency range where the station is saved.
• Press the
memory page (from 00 - 39).
• Within 10 seconds press the
space to store the station.
The station is played immediately after entering the memory space.
Carry out automatic station search
Your world receiver can search the frequencies within a range and store
the stations it finds. Do the following to activate the automatic search
(automatic memory scan/AMS):
• Press the
• Hold down the
The world receiver now searches all frequencies in the currently selected
frequency range and saves the stations it finds from the currently set memory
page and memory space.
Displaying memory spaces
• Press the
ries for the selected band.
All stored stations will be played in succession for about 15 seconds.
• Press the button
Note:
Please take note that with this the snooze function will be activated.
Repeatedly press the button
Downloaded from www.Manualslib.com
PAGE
button and then use the
MEM
button once. The MEM message flashes.
MEMORY SCAN
MEMORY SCAN
button to call up the content of all station memo-
SNOOZE
manuals search engine
UP
M.0/5 M.4/9
–
button for about 1 second.
to finish the rendering of the memory positions.
SNOOZE
until 00 appears in the display.
- 28 -
DOWN
or buttons to select a
buttons to select a memory