Safety Information; Symbols/Warnings; Symbols Used On The Workstation Frame; Organizational Measures - actiforce ALUFORCE PRO 251 M Betriebs- Und Montageanleitung

2 Safety Information

2.1 Symbols/warnings

The assembly/operating manual uses the following terms and signs to indicate dangers:
This symbol indicates an immediate threatening situation for any person's life
or health. Failure to adhere to such information may have serious consequences
for health, or could even result in life-threatening injury or death.
This symbol indicates important information. Failure to adhere to such infor-

mation could lead to damage to the workstation.

2.2 Symbols used on the workstation frame

Do not place objects or parts of the body under the workstation frame or be-
tween the cross members. This could cause serious injury.
Do not exceed the maximum permitted load on the workstation frame. Over-
loading could lead to breakage and serious injury as a consequence.

2.3 Organizational measures

The workstation frame can best be assembled by two people. Turning the frame, once

the work surface has been fitted, is a task in particular which requires two people!

2.4 Informal safety measures

Keep the assembly/operating manual in the place where the workstation frame is used at

all times.
Make sure that all safety information on the table (see Section 2.2, Symbols used on the

workstation frame) is legible, replacing the same if necessary.

2.5 Note for those assembling the workstation

The workstation must be assembled/worked on by persons over the age of 16.

The persons referred to above must have read and understood the assembly/operating

manual.

2.6 Transport and assembly

The workstation frame must be moved by two persons only, and in such cases must be

retracted.
Do not drag or pull the workstation frame over the floor.

Assemble the workstation frame with the supplied tools only. They are the only tools

which ensure that the screws can be tightened to the correct torque.
6