Adjustment Of The Frame Width - actiforce ALUFORCE PRO 251 M Betriebs- Und Montageanleitung

3.4.9 Adjustment of the frame width

Pull the frame outward to the required width and depth (see chapter 3.4.1 and 3.4.2

Pre-assembly of the Top and Bottom Crossbars)
Tighten the set screws in the top and bottom crossbars only now.

Photo 27 & Photo 28
Tighten the 8 pinching nuts on the drive shaft extensions and on both drive units with

the spanner M10.

27

28
To adjust
frame width
Set Screw
19