actiforce ALUFORCE PRO 251 M Betriebs- Und Montageanleitung Seite 14


15
Photo 15
Place a slide nut in the slit at the top of Centre leg.

Place a set screw in this slide nut.

Gently tighten the set screw with the 4 mm Allen key.

Photo 16
Place the pre-assembled top crossbar (#16)over the set screws.


Be aware that the top crossbar is flush with the top of the legs.
Place the flange nut on the set screw.

Tighten the flange nut with the pipe key 10.


A cover for this position is not available

16
14