Mounting The Feet - actiforce ALUFORCE PRO 251 M Betriebs- Und Montageanleitung

3.4.2 Mounting the Feet

Assemble the following components:
# Part name
01 Leg
02 Foot
03 Centre foot
10 Foot adjuster
12.2 Bolt M6x25
12.8 Washer M6
08 Spanner M10

1

3
!
Photo 1
Twist 2 foot adjusters into the bottom of each foot.

Photo 2 & 3
Turn the pre-assembled legs up-side-down (with 2 persons).


Secure the pre-assembled legs against falling over.

Position the foot, like photo 3, in relation to the crossbar

Connect each foot to a leg with 4 bolts and 4 washers.

Tighten the 12 bolts with the spanner M10.

Turn the legs back on its foot.

Qty
3
2
1
6
12
12
1

2
10