How To Use - EBL -DC503 Benutzerhandbuch

HOW TO USE

USE STEPS
1.
Connect the charger to power, 2A input suggested.
2.
Place the battery inside the charger correctly by making sure the
+/- pole of battery matches the +/- pole of the charger, otherwise
the battery will not charged or burning out the charger.
3. The charger will charge the battery when plug in, and the LED
turns to "RED", each slot has a LED shows the charging progress
dependently, LED turns to "GREEN" when fully charged.
4.
Get the batteries out after fully charged and cut the power.
5.
This charger is only charging for 9V rechargeable batteries.
04