Optika Italy SZR-Serie Bedienungsanleitung Seite 10

10. Insert eyepieces into empty eyepieces sleeves. (Fig. 5)
11. Screw the objective in the bottom part of the microscope
body. (Fig. 6)
12. Lock the objective by screwing the fixing screw ⑧.
13. Remove the rubber protection caps ⑨ from the light guide.
(Fig. 7)
14. Insert one end of the light guide into the epi-illuminator. (Fig.
8)
15. Tighten the fixing screw ⑩.
⑩
Page 10
F ig. 5 F ig. 5
⑧
F ig. 6 F ig. 6
⑨
F ig. 7 F ig. 7
F ig. 8 F ig. 8