Operation Instructions; Function Setting; Inquiring Function - Kuppersberg HM 629 Technischer Pass

TECHNICAL PASSPORT
Built-in Electric Oven

OPERATION INSTRUCTIONS

1. Clock Setting
After connecting the unit to the
power, the symbols «0:00» will be vis-
ible on the display.
1. Press « » the hour figures will
flash.
2. Rotate «K2» to adjust the hour
figures, (time should be within 0--23).
3. Press « », the minutes will
flash.
4. Rotate «K2» to adjust the minutes
setting, (time should be within 0--59).
5. Press « » to finish the clock
settings. « : » will flash, and the time will
be illuminated.
Note: The clock is 24 hours. After
power on, if not set, the clock will show
«0:00».
2.

Function Setting

1. Rotate «K1» to choose the cook-
ing function you require. The related
symbol will illuminated.
2. Rotate «K2» to adjust the tem-
perature..
» to confirm the start
3. Press «
of cooking.
4. If step 2 is ignored, Press «
to confirm the start of cooking and the
default time is 9 hours, the default tem-
perature will display on the LED.
NOTE:
1. The step quantities for the ad-
justment time of the knobs are as fol-
low: 0--0:30min: step 1 minute 0:30--
9:00 hour: step 5 minutes.
26
2. The step quantities for the ad-
justment of temperature is 5°C, «
and « » can not adjust the tempera-
ture.
3. Rotate «K1» to adjust the cooking
time when cooking begins. Then press «
» to confirm.
If « » not pressed within 3 sec-
onds, the oven will revert back to the
previous time to continue cooking.
4. Rotate «K2» to adjust the tem-
perature when cooking begins. The re-
lated indicator will be illuminated. Then
press « » to start cooking. If «
not pressed in 3seconds, the oven will
revert back to the previous temperatrue
to continue cooking.
3. Lamp Setting
1. Rotate «K1» to select the rel-
evant function, then the corresponding
icon will be on.
2. Press «
and lamp icon «
will flash.
4.

Inquiring Function

In the following states, you can use
inquiring function, after 3 seconds re-
»
turn to the current state.
1. During working state, if the clock
was set, press «
current time; if the reminder function
was set, press «
time of reminder.
2. In reminding state, if the clock
was set, press «
current time.
ENGLISH
» button to start, «0:00»
» will light up, « : »
» button to see the
» button to see the
» button to see the
»
»