Paramondo Pergorama 4000 Montageanleitung Seite 77

Optional assembly of the brackets for windbreaker
Only to be installed if the width or projection is > 4000 mm.
In the next step, the brackets for the windbreaker are mounted on the guide rails.
Channel A
1
To do this, push the screw nut into channel A. Do not tighten the screws completely, as the brackets (together with
the brackets (together with the windbreaker itself) will only be positioned at a later stage.
2
Screw nut
Mounting
Inside of the
Guide rail
Bracket for windbreaker
incl. pre-assembled bolts
and nuts
www.paramondo.de
77