SOLIS 8371 Bedienungsanleitung Seite 111

5. R E M OV I N G T H E A T T A CH ME N T S F ROM
TH E B L EN D ER SH A F T
You have to remove the attachment at the end of the mixing process. This is
●
done exclusively with the included key (S) – never attempt to remove the attach­
ments by hand, you might be seriously injured!
Make sure that the power plug is not plugged into the power socket.
●
Hold the handle of the key and push the fork of the key under the attachment
●
and against its shaft. You can hear a faint "Click".
Lever the blade attachment up with the help of the key – the attachment dis­
●
engages from the foot of the blender shaft. Point the foot of the blender away
from you to prevent the attachment from being launched into your direction or
even your face.
Carefully hold the attachment in one hand and the key in the other hand. Turn
●
the key to the position "K" and lift the attachment off.
You can place the cleaned attachment and the key in the accessory box.
●
Be careful when touching the blades with your hand – they are extremely sharp.
●
"Click"
push
turn
K
pull
GB
111