ECG Forza 6600 Metallo Bedienungsanleitung Seite 9

1
4
DESCRIPTION OF THE CONTROL PANEL AND DISPLAY
Turning the appliance on/off
1. When the appliance is plugged in, the
display. This means that the machine is in standby mode.
2. If it is in standby mode without any action for 1 minute, the display turns
off and the appliance enters hibernation mode.
3. Press the button in hibernation mode, the display will light up again
and the machine will enter standby mode.
Speed setting:
Set the required speed using the buttons +/-. Touch
and display speed. Touch it again and the operation stops.
Timer setting function:
Touch the SET button. Use the +/- buttons to set the required time. The set speed will be shown on the display.
Start the appliance using the
Press the button during operation to pause the machine and adjust speed using the +/- buttons. Confirm
selection by pressing SET and the appliance starts again.
Selection of accessory
Use Picture
Kneading hook
2
5
symbol will flash on the
to start the machine
button. When the set timer time expires, the appliance stops automatically.
Speed Time (min)
1–3 3–5
3
6
Max. amount Instructions
1000 g flour and 1st speed for 30
538 g water s, 2nd speed for
30 s and then
3rd speed for
2 min to 3 min
to knead the
dough.
9