ECG Forza 6600 Metallo Bedienungsanleitung Seite 12

• Connect the appliance to the mains. Set the speed and time
• Insert the dough, pre-cut into strips, into the funnel of the machine. Use the tamper if required. The
machine will push out the pasta in the desired shape.
WARNING: Never use your fingers to push the mixture into the machine.
WARNING: Do not let the appliance running continuously for more than 10 minutes. Allow it to cool for at least
30 minutes before starting again.
Grating and cutting vegetables
V1 Tamper
V2 Grater machine with funnel
V3 Fine grater
V4 Coarse grater
V5 Slicer
• Insert the selected attachment (fine grater V3, coarse grater V4 or slicer grater V5) into the grater V2 (see
figure PG1).
• Attach the assembled machine to the multifunction head (see figures PG2, PG3). Proceed in the same way
as described in the "Meat grinder" section.
• Place a suitable container under the grinder outlet.
• Cut the potatoes or other vegetables into pieces that are the same size as the grater feed.
• Connect the appliance to the mains, switch on and select the time and speed. Start the program.
• Use tamper V1 to push the vegetables into the funnel of the machine (see figure PG4).
WARNING: Never use your fingers to push the mixture into the machine. Be careful not to injure yourself when
handling the graters - the graters are sharp.
WARNING: Do not let the appliance running continuously for more than 5 minutes. Allow it to cool for at least
15 minutes before starting again.
12