Preparation Before Use - Sublue WhiteShark Tini Bedienungsanleitung

Controller
1. Switch/gear button
2. Networking button
3. Start button
4.
State indicator
5. Charging port
6. Magnetic safety rope connection
7. Fastening bolt
4
2
3
1
5
5
6
7

Preparation Before Use

1
Unboxing Inspection
Inspect Device Exterior
After opening the device packaging, carefully check that the contents in the box are not
missing or damaged.
Inspect Device Functions
Check that the controller can power on normally and be networked with the Tini
propulsion system*. After networking, press the start button to check that it does not get
stuck and can correctly start and stop the thrusters of the propulsion system. Check that
you can normally switch between speed settings.
* Refer to the relevant instructions below for the specific networking method.
In the event of any problem, do not use the product and promptly contact the Sublue
aftersales service center or an authorized aftersales service site.
2 Check the Battery Level and Charge the Battery
Charge the controller
The controller has a built-in magnetic charging interface that connects to the magnetic
charging cable provided by Sublue.
To charge the controller, use an adapter of 4.5-5.5V, 1A-3A.
EN
6