Software Settings; Configuration Menu - struers Prepamatic-2 Gebrauchsanweisung

Software Settings

Configuration Menu

8
Prepamatic-2
Instruction Manual
Switch on the power at the main switch located at the right hand side
of the machine. The following display will appear briefly:
The display will then change to the last screen shown before
Prepamatic-2 was switched off, usually a preparation method. When
switching on Prepamatic-2 for the first time, the MAIN MENU display
will appear. If the heading in the display is different, press Esc, until
the MAIN MENU appears (a long beep can be heard).
The MAIN MENU is the highest level in the menu structure. (See
also the Menu Overview, Section 6). Pre-defined Struers methods,
your own methods, manual functions or the configuration menu can
then be selected.



Press MENU DOWN



Press ENTER

to select CONFIGURATION

to activate the CONFIGURATION menu