Check After Installation - CeraGem MASTER V4 Gebrauchsanweisung

3. Installation
* After you purchase the product, a professional installation technician
will carry out the basic assembly process.
1
Take out the product and its components from the box.
2 After fastening the supporting mat to the sliding rail, place the main body mat
(which is attached to the head cushion and the outer fabric) onto the main body
frame. (After moving the supporting frame to the middle of the main body, push in the
main body mat completely.)
3
Connect the cable which is attached to the main body to the connector of the
supporting frame.
(Open the supporting frame before connecting.)
4
Assemble the remote control cradle to the frame and attach the remote
control to the cradle.
5
Check the remote control, abdominal vibration projector and
3-sphere projector connector, and connect them correctly.
6
Before connecting the power cord, connect the remote control first.
7
Connect the power cord to the main body and plug into a socket.
14

4. Check after installation

1
Turn on the power at the side of the main body.
(Please turn off the power when the product is not being used.)
2
Press the power key of the remote control and check whether the
display turns on.
1. According to the user, set the temperature appropriately when using the product.
2. When sitting down and using the product, open the supporting frame completely.
3. After using the product, turn off the power on the remote control and then turn off
Caution
the main body.
정격전압 AC220V, 50/60Hz 소비전력 사용목적 모델명 근육통완화 CGM MB-1901 품목명 제조허가 380VA 개인용온열기 제 697 호
품목허가 등록번호 제인 14-1353 호 R-R-cer-CGMMB-1901 포장단위 1BOX/1SET
제조사 TEL : 041-523-2550 / FAX : 041-523-2560 충남 천안시 서북구 성거읍 정자1길 10 주식회사 세라젬
제조번호 제조년월
* 본제품은 의료기기 입니다.
*For the remote control's screen, refer to page 20.
15