Herunterladen Inhalt Inhalt Diese Seite drucken

How To Use The Remote Control; Turning On The Product; Setting The Temperature - CeraGem MASTER V4 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für MASTER V4:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. How to use the remote control

Turning on the product

1. Check the power connection to the main body, and
then press the power button on the remote control.
- To turn off the product, press the Power button on the remote control
for approximately 2 seconds.
If there is any discomfort or emergency while operating the product,
press the on/off button on the remote control to stop the operation.
2. The ceragem logo will appear on the screen of the
remote control and the remote control will turn on.
3. When the main screen is displayed, use the product
by pressing the desired button.
- The last-used set value will be displayed.
(The set value will not be stored if the product is turned off abnormally.)
- When the product is closed, the closed product image will be displayed.
20
Before using the product, check
if the power cord is connected to the
outlet correctly.
3. How to use the remote control

Setting the temperature

1. Check the current temperature and then press the
Temperature select button.
- The current temperature of the internal projector will be displayed
on the main screen.
- When the product is closed, the closed product image will be displayed.
2. Select a desired item by pressing the temperature
select button.
- Temperature selection order: Internal projector → Main body mat →
Supporting mat → 3-sphere projector → Abdominal vibration projector
- When a temperature is selected, the image of the relevant item will be
displayed in red.
- The abdominal vibration projector and 3-sphere projector will only be displayed
when connected and the position may vary according to the installation order.
Internal projector
Main body mat
Off, 30~65℃
3. Use the product after selecting a temperature and adjusting
it by using the up/down button.
- Shortly after the setting is complete, the screen will return to the main screen.
Do not use the external projectors (abdominal vibration
projector, 3-sphere projector) on any part of the body for an
extended period of time.
Caution
(There is risk of receiving a burn, even at a low temperature.)
3-sphere
Abdominal
Supporting mat
projector
vibration projector
Off, 30~60℃
21

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cgm mb-1901

Inhaltsverzeichnis