CeraGem MASTER V4 Gebrauchsanweisung Seite 16

3. How to use the remote control
Using automatic mode
1. Turn on the remote control, check the current status
and press the automatic mode button.
Mode A :
Mode 1 : Approximately 75 minutes.
Mode 2 : Approximately 18 minutes.
Mode 3
Mode 4 : Approximately 36 minutes and 30 seconds.
Mode 5 : Approximately 36 minutes and 30 seconds.
Mode 6 : Approximately 36 minutes and 30 seconds.
Mode 7 : Approximately 36 minutes and 30 seconds.
Mode 8 : Approximately 36 minutes and 30 seconds.
Mode 9 : Approximately 36 minutes and 30 seconds.
2. Select a mode by pressing the automatic mode button.
body shape sensing will begin. Lie down in the correct
posture.
A
- You can set the desired mode by using the automatic mode button or
the up/down button while the relevant item is displayed in yellow.
- When the mode begins, the Ceragem sound will be played.
- The mode cannot be paused during body type sensing.
- The body type graph varies from person to person.
3. When body shape sensing ends, the mode will begin
automatically. Maintain correct posture.
- The time remaining will be displayed at the top of the human body icon.
- When pausing, the internal projector will move down vertically in order
to prevent burns and injury.
(When the mode is executed again, the set strength will be restored.)
- When 5 minutes have passed after pausing, the product will turn off
automatically.
28
Approximately 36 minutes and 30 seconds.
: Approximately 36 minutes and 30 seconds.
Sequential press (Mode A, 1~9 are selected sequentially)
3. How to use the remote control
Using intensive mode
1. Turn on the remote control, check the current status
and press the intensive mode button.
2. When body shape sensing ends, the intensive mode
will begin. Maintain correct posture.
- The time remaining will be displayed at the top of the human body icon.
3. If you wish to set a specific position for using the product,
use the product after moving the internal projector to a
desired position by using the up/down button.
- If you cancel the position setting by pressing the intensive mode
button again, the internal projector will move.
- When 90 minutes have passed after setting the remote control,
the remote control will turn off automatically and the mode will end.
- When pausing, the internal projector will move down vertically in order
to prevent burns and injury.
(When the mode is executed again, the set strength will be restored.)
- When 5 minutes have passed after pausing, the product will turn off
automatically.
Duration for mode Approximately 90 minutes.
29