Technical Data; Unpacking - Scheppach PCS4-20ProS Original Bedienungsanleitung

6. Technical data

Motor voltage
Engine output
Type of guide bar (pre-fitted)
Type of saw chain (pre-fitted)
Tank for chain lubricating oil
Max. cutting speed
Max. cutting length
Chain pitch
Driving link thickness
Chain wheel tooth pitch
Weight unfuelled, without cutting
gear approx.
Weight unfuelled, with battery
approx.
Technical changes reserved!
Noise and vibration
m Warning:Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
wa/pA
Vibration parameters
Vibration a
h
Uncertainty K
h
Information on the specified vibration emission
value
Warning:The actual vibration emission value present
during use of the machine may differ from the value
given in the instruction manual or by the manufacturer.
To be accurate, an estimate of the load level should be
made notoriously all work periods during actual use,
e.g. the times when the tool is off, idle and not in use. In
this way it is possible to significantly reduce the degree
of stress throughout the entire working time.
When using this tool regularly, wear anti-vibration
gloves and avoid working in ambient temperatures
of 10°C or less. Make a work schedule to spread
the use of high vibration tools over several days.
38 | GB
Ensure as little vibration as possible of the tool via
regular maintenance and stable parts on the device.
Replace worn parts immediately.
20 V DC
The specified vibration emission value has been meas-
0.4 W
ured according to a standardised test procedure and
ROYAL 4"
can be used for comparison of one power tool with
CLQ4328
another.
ROYAL 4" DG04-
It has been reported that vibration from hand-held pow-
28-43P
er tools can contribute to a condition called Raynauds
ca. 30 cm³ (30
syndrome (white finger syndrome) in certain individ-
ml)
uals. Raynaud's syndrome is a vascular disease that
6.8 m/s
causes the small blood vessels on the fingers and toes
110 mm
to cramp in spasms. The affected areas are no longer
1/4"
supplied with sufficient blood and therefore appear ex-
tremely pale. The frequent use of vibrating tools can
0.043"/1.09
mm
cause nerve damage in people whose circulation is
6 / 6.35 (1/4")
impaired (e.g. smokers, diabetics). If you notice unusu-
1.1 kg
al adverse effects, stop working immediately and seek
medical advice. For long-term and regular users, it is
1.7 kg
therefore recommended to closely monitor the condi-
tion of your hands and fingers. Observe the following
information to reduce hazards:
1.
2.
3.
99 dB(A) 4.
93 dB(A)
3 dB(A)
5.
7.
6 m/s
2
1.5 m/s
2
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
• If possible, keep the packaging until the expiry of the
• Familiarise yourself with the product by means of the
• With accessories as well as wearing parts and re-
www.scheppach.com
Keep your body warm, especially your hands, es-
pecially in cool weather.
Take regular breaks and move your hands to pro-
mote circulation.
Limit the use of high vibration tools per day and
spread them over several days Make a work
schedule that limits vibration exposure.
Ensure as little vibration as possible of the tool via
regular maintenance and stable parts on the de-
vice. Replace worn parts immediately.
Change your working position regularly.

Unpacking

aging and transport safety devices (if present).
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
warranty period.
operating manual before using for the first time.
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.