Safety Instructions: Installation - Veripart VPSBSW177Z Benutzerinformation

1.2 SAFETY INSTRUCTIONS: INSTALLATION

!
DANGER!
Risk of re / ammable materials.
CAUTION!
• The appliance is heavy. Take care when handling and wear protective
gloves and closed footwear.
• It is dangerous for persons other than authorised service technicians to
carry out maintenance on electrical components (plug, power cable,
compressor, etc.) or to carry out repairs with the cover plates removed.
• To avoid the risk of electric shocks, do not attempt to repair this
appliance yourself.
• If you detect any damage to the appliance or the power cable, do not
connect the appliance but contact the service department.
• The power cable must be attached behind the appliance and must not be
exposed or loose.
• Make sure that the power cable of the installed appliance is always easily
accessible.
• This appliance requires a standard 220-240V 50Hz socket with 2-pole
earthing. The power cable of this appliance is equipped with a 2-pole
plug suitable for standard wall sockets with earthing to minimise the risk
of electric shocks.
• On rst installation (or after turning the door) wait at least four hours
before connecting the appliance to the power. This allows the oil to ow
back into the compressor.
• Ensure that air can circulate around the appliance.
• Pull the plug out of the socket before carrying out any actions on the
appliance (e.g. turning the door).
• Incorrect use of the earthed plug may cause an electric shock.
• This appliance is not intended for use as a built-in refrigerator.
• The correct operation of the appliance can only be guaranteed if the
speci ed temperature range is respected. If, as a result of another
installation, the correct ventilation requirements are not met, the appliance
will function correctly, but energy consumption may increase slightly.
39