Operation; Down Button - Klarstein VINOVILLA 17 DUO VILHELMINE Bedienungsanleitung

EN

OPERATION

On / Off
Press and hold the button for 3 seconds to switch off the unit and go
into stand-by mode. Press and hold the button again for 3 seconds to
return to normal operation.
Light
Press the button to switch the LED lights inside on or off. In stand-by
mode, the button has no function.
Zone switch
Press the button to switch between the upper and lower zones and
select the desired zone for the temperature setting. Press the button
once, the LED display of the selected zone flashes regularly. Press the
UP and DOWN buttons to set the temperature. Press the button again
to change the zone and set the temperature.
Up key
Press the button once. The LED display flashes regularly and shows
the currently set target temperature. Continue pressing the button
to set the desired temperature. Each time the button is pressed, the
temperature increases by 1 °C. If no button is pressed, the display
stops flashing after 5 seconds and the newly set temperature is saved.
The LED display then shows the current temperature inside again.

Down button

Press the button once. The LED display flashes regularly and shows
the currently set target temperature. Continue pressing the button
to set the desired temperature. Each time the button is pressed, the
temperature decreases by 1 °C. If no button is pressed, the display
stops flashing after 5 seconds and the newly set temperature is saved.
The LED display then shows the current temperature inside again.
Changing the Fahrenheit/Celsius display
To switch between Fahrenheit and Celsius, press and hold the button
for 3 seconds.
33