Werbung
3
1
1. Connect the power cord between the product and a grounded AC outlet. Make sure your power source is adequate for the product
EN
voltage rating. The voltage rating is on the product label. The product uses either 100-127 Vac or 220-240 Vac and 50/60 Hz.
CAUTION:
To prevent damage to the product, use only the power cord that is provided with the product.
2. Turn on the product.
3. Follow the instructions on the control panel.
4. To verify that your product prints, print a report by going to the Reports menu on the control panel.
FR
DE
IT
ES
3
3
2
4
Werbung
