Operation - Klarstein VINSIDER 36 Bedienungsanleitung

OPERATION

1. Cleaning the compartment
Before power on, clean inside of the appliance and check the drainage pipe in
good connection. For details, please refer to the "Maintenance and cleaning".
2. Placement
Before power on in the first time, keep it static at least 30 minutes.
3. Power on
The appliance start operation and it will cool down inside after 1 hour,
otherwise you should check the power connection.
Control panel
ON/OFF
ON/OFF
LIGHT
UP
DOWN
CHILD LOCK
°F/°C - display
change
LIGHT UP
DISPLAY
1. Keep pressing the key 3 seconds, power down, goes to stand-by mode.
2. Keep pressing the key again 3 seconds to return back to normal
working.
Press the key, turn on or turn off the LED lights inside. In stand-by mode,
the key is invalid.
Press the key once, LED Display in regular flash showing current set
temperature. Continue pressing to adjust set temperature, one press
increase 1℃. Regular flash quit after 5 seconds detecting no press and
new set temperature save. LED display return to show actual temperature
inside.
Press the key once, LED Display in regular flash showing current set
temperature. Continue pressing to adjust set temperature, one press
reduce 1℃. Regular flash quit after 5 seconds detecting no press and
new set temperature save. LED display return to show actual temperature
inside.
1. Lock: Press both keys at the same time for 3 seconds to lock.
2. Unlock: Press both keys at the same time for 3 seconds to unlock.
Switch temperature display between Fahrenheit and Celsius by pressing
both keys for 3 seconds.
DOWN
EN
35