Reset - philrouge EOS Relax Montage- Und Bedienungsanleitung

3.4.

Reset

A controller fault is indicated by an audible beep when a button on the
handheld transmitter is pressed. The fault can be resolved by resetting the
handheld transmitter and the controller:
Press and hold the "Sleep" and
"Up/Down" function buttons simul-
taneously until the bed is resting
on the castors.
Simultaneously press both
buttons on the second row of
controls.
An audible beep confirms the
start of the reset procedure.
Hold down both buttons until
the beep is no longer heard.
Then move the bed to the
highest position; the controller
will then reinitialise itself.
68