Inhaltsverzeichnis
Werbung
the electric power supply or from the batteries) and
do not tamper with it.
Contact one of the manufacturer's technical service
centres.
• All maintenance or accessory replacement opera-
tions must be carried out in environments with ade-
quate lighting and only after having disconnected the
machine from the electric power supply by detaching
the battery connector.
☞ All work on the electrical system and all mainte-
nance and repair operations (especially those not
explicitly described in this manual) should be carried
out only by authorised service centres or by speciali-
sed technical personnel who are experts in the sector
and in the pertinent safety regulations.
☞ The machine owner can only use original acces-
sories and spare parts supplied exclusively by the
manufacturer since such parts are the only ones that
guarantee that the equipment will operate safely wi-
thout any problems. Do not use parts disassembled
from other machines or other kits as spare parts.
☞ Before each use, check the machine and, in particu-
lar, check that the battery charging cable and the con-
nector are in good condition and safe for use. If they
are not in perfect condition, do not use the machine
for any reason until an authorised specialist repairs
the defective parts.
☞ If foam or liquid is noted, immediately turn off the
suction motor.
☞ Do not use the machine on textile flooring, such as
rugs, carpeting, etc.
Wax, foaming detergents or dispersions along the
hoses may cause serious problems for the machine
or clog the hoses.
2.2.
SCRAPPING OF THE MACHINE
If the machine will no longer be used, remove the
batteries and dispose of them in accordance with the
eco-compatibility regulations as set forth in European
standard 2013/56/EU or deposit them in an author-
ised collection centre.
To dispose of the machine, comply with the current
laws where it is used:
- disconnect the machine from the mains and clean it
after emptying any liquids;
- separate the machine into groups of homogeneous
materials (plastics in accordance with the recycling
symbol, metals, rubber, packing). For parts containing
different materials, contact the competent authorities;
Each homogeneous group must be disposed of in ac-
cordance with recycling laws.
In addition, it is recommended to eliminate those
parts of the machine that may be dangerous, espe-
cially for children.
2.3.
DISPOSAL (WEEE)
As the owner of electrical or electronic equipment,
the law (in accordance with the EU Directive 2012/19/
EU on waste from electrical and electronic equipment
and the national laws of the EU Member States that
have implemented this Directive) prohibits you from
disposing of this product or its electrical / electronic
accessories as municipal solid waste and obliges you
to make use of the appropriate waste collection facil-
ities.The product can be disposed of by returning it to
the distributor when a new product is purchased. The
new product must be equivalent to that being dis-
posed of. Disposing of the product in the environ-
ment can cause great harm to the environment itself
and human health.
The symbol in the figure indicates the urban waste
containers and it is strictly prohibited to dispose of
the equipment in these containers. Non-compli-
ance with the regulationtis spulated in the Directive
2012/19/EU and the decrees implemented in the var-
ious EU Member States is administratively punishable.
2.4.
NOISE AND VIBRATIONS
- Acoustic pressure:
- Acoustic power measured:
- Acoustic power granted:
- Vibrations:
3.
HANDLING INFORMATION
3.1.
PACKING LIFTING AND TRANSPORT
• During all lifting or transport operations, make
sure that the packed machine is securely anchored
to prevent it from tipping over or falling accidentally.
Transport vehicle loading and unloading operations
must be carried out with adequate lighting.
The packed machine must be handled using ade-
quate devices, making sure not to damage/strike any
part of the packing, not to tip it over and to be very
careful when placing it on the ground.
☞ All these instructions also apply to the batteries
and the battery charger.
3.2.
CHECKS UPON DELIVERY
☞ When the goods are delivered (machine, battery
or battery charger) by the transporter, carefully check
the condition of the packing and its contents. If the
contents have been damaged, notify the transporter
and reserve the right, in writing (select the word "re-
serve" on the document), to submit a claim for com-
pensation before accepting the goods.
3.3.
UNPACKING
• Wear safety clothing and use adequate tools to
26
LpL = 69 dB
LwA = 76,35 dBA
LwA = 80 dBA
0,14 m/s² (Uncertainty ±15%)
Werbung
Inhaltsverzeichnis
