Print The Result Protocol; Printout Of Saved Test Results - Dräger Alcotest 7510 Technisches Handbuch

Print the result protocol

Print the result protocol
The Alcotest 7510 can exchange data with the "Dräger Mobile Printer" and print a result proto-
col using the infrared interface see "Data interface" on page 53) . Protocol content is based
on the configuration, e.g., measurement result, device information, subject data and user data.
Printout procedure upon completion of a
measuring sequence:
Switch on the "Dräger Mobile Printer" as
per the Dräger Mobile Printer Instructions
for Use.
When the Dräger Alcotest 7510 shows
the test result, place the device next to the
Dräger Mobile Printer so that the infrared
interfaces (IR) directly face each other.
— The printing of the protocol automatically
starts. The number of printouts corre-
sponds to the device configuration.
— If the printout is interrupted during the
printing process by a disconnection of
the visual communication of the interfac-
es, the printout will be completely restart-
ed after the visual communication has
been restored.
When the printout is finished, press the
key to start a new measurement.
OK

Printout of saved test results

To print saved test results, access the menu item » Show last tests « (see Main menu /
Menu information, page 39), and select the corresponding test.
— Continue the procedure as per the procedure directly after a measuring sequence
When the printout is finished, exit the menu or select an additional test, as applicable.
54
IR
OK
D
Alcotest 7510