The main menu
– » Information « Menu
» Show abs. pressure «
Display of the current air pressure – only for devices with ambient pressure sensor.
Go back with the
» Show cal. dates «
Show date of the last and the next calibration.
Go back with the
» Show acc. dates «
Show date of the last and the next accuracy check.
Go back with the
» Show configuration «
The current device settings are located under configuration. These settings can be
changed under the » Settings « menu (see page 42). Further information about these items
can be found here.
Display mode
–
Display of the net results in digits or as a range.
Measurement unit
–
Measurement unit of the alcohol concentration (default setting mg/L).
PASS, ALERT, FAIL, HIGH
–
Set threshold values for the display modes PAF, PF and ZPWF.
Sample mode – Auto-sample
–
Type of sampling: with fixed volume or with end of breath.
Sample mode – Additional
–
Activated additional options such as manual or passive sampling.
Blow criteria
Volume
–
Minimum expiration volume in litre.
Blow time
–
Minimum blow time in seconds.
» Show test number «
Display of the number of the next test.
Go back with the
40
key.
OK
key.
OK
key.
OK
key.
OK