Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Technical specification
The build-in electrical device of the showcase consists of the control units located at the base of the cabinet.
Related circuit diagram instruction, parts list and user manual are all in the sealed plastic bag. Please keep these
documents and user manual safe.
We hereby declare that the showcase complies with the N 108 Act of 25 January 1992 as a result of the
implementation of the ECC 89/109 standard of regulation for food contact material.
We hereby declare that the showcase is suitable for the storage of frozen fruit products which is in accordance
with Decree No.283 of 19th, April, 1942 and its subsequent decree, as well as the Decree No.85 of 《Official
Announcement》published in 26th, March, 1981 <Date of Decree: January 29, 1981>
The thermostat can only be used when the after-sale service provider need to make adjustment.
7. Loading of goods
Connect the cabinet to the wall socket and turn on the showcase by power switch. The showcase will start the
refrigeration system. Before loading of the goods into the showcase, it need to run 2 hours to reach the
temperature of goods storage. The expected performance of the showcase has been set before delivery from
factory.
When loading of the goods into the showcase, please confirm that the size and variety of the goods are similar;
The goods do not exceed the loading line and do not affect the normal flow of cold air (figure below).
8. Method of usage
This showcase is designed and manufactured for storage of frozen fruits. This type of showcase is for storage of
pre-packaged fresh fruit. The function of the showcase is mainly to keep the temperature of the food, not to
lower the temperature of the food. So, when loading the of goods to the showcase, the food should be at the
temperature of preservation.
9. Provisions and restrictions
Strictly prohibit to load the pharmaceutical products, glass-bottled items into the showcase, these items may be
broken and cause some security risks. You cannot move the cover or panel that you need to remove with the
tool, and you cannot move the cover of the electronic control board.
Vendor or suppliers shall not be liable for any damage resulting from non-standard, incorrect or unreasonable
use.
7
www.combisteel.com
Werbung
Inhaltsverzeichnis
