Before Using Your Fridge - AEG AC3801 Bedienungsanleitung

• For Side by Side niche installation please refer to the Joining Kit provided with the
cabinet freezer and its installation manual (NOTE: joining kit is also available separately
as accessory)
• Install the two plastic distance guides (the parts on the black vanes -condenser- at the
rear) by turning it 90° (as shown in the figure) to prevent the condenser from
touching the wall.
• The distance between the appliance and back wall must be minimum 42mm
and maximum 75mm.

Before Using your Fridge

• When using your fridge for the first time, or after transportation, keep it in an upright
position for at least 3 hours before plugging into the mains. This allows efficient operation
and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the first time. This is normal and the
smell will fade away when your fridge starts to cool.
Internal lighting
WARNING!
Risk of electric shock.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These
lamps are intended to withstand extreme physical conditions in household appliances,
such as temperature, vibration, humidity, or are intended to signal information about
the operational status of the appliance. They are not intended to be used in other
applications and are not suitable for household room illumination.
EN -10-