Updating The Software; Starting The Set-Up Wizard; Viewing Software Information; Setting The Backlight - Medion P85027 Bedienungsanleitung

24.7. Updating the software

You can search for and, if applicable, install software updates under SOFTWARE
UPDATE.
24.7.1. Performing automatic updates
Under AUTO UPDATE, select YES to automatically search for software updates at
regular intervals. If an update is found, you will be informed and can confirm the
update by pressing OK.
If security-related updates are necessary, we will supply them to you as
quickly as possible.
24.7.2. Searching for software updates
Select CHECK NOW to start searching for software updates immediately.

24.8. Starting the set-up wizard

Select SETUP WIZARD to start the set-up wizard as described in section "Using the
device for the first time".

24.9. Viewing software information

The software version and radio identification number of the device are shown
under INFO.
24.10.

Setting the backlight

You can configure the backlight under BACKLIGHT:
– Dim the display in standby or operating mode after a pre-determined time
– Display brightness
Setting the dim time during operation
 Select TIMEOUT and press OK to confirm. Select ON, 10, 20, 30, 45, 60,
90, 120 or 180 seconds and press OK to confirm.
Display brightness during operation
 Select ON LEVEL and press OK to confirm. Set your preferred brightness,
HIGH, MEDIUM, LOW, and press OK to confirm.
You can also set the display brightness during operation using the
the remote control.
The brightness of the control dials cannot be changed.
354
button on