Herunterladen Diese Seite drucken

Werbung

Data Enabler Pro
A
Fixtures must be installed by a qualified electrician
in accordance with all national and local electrical and
construction codes and regulation.
Les appareils d'éclairage doivent être installés par un électricien
diplômé conformément à tous les codes et réglementations électriques
et de construction nationaux et locaux.
Confirm all components received
Confirmez la réception de l'intégralité des composants
Bestätigen Sie, dass Sie alle Bestandteile erhalten haben
Compruebe si ha recibido todos los componentes
Confermare tutti i componenti ricevuti
Controleer alle ontvangen componenten
すべてのコンポーネントが揃っていることを確認します
确认收到了所有部件
Ensure latest firmware is running and update as necessary. See Product Guide for complete
instructions.
S'assurer que le micrologiciel le plus récent est utilisé et effectuer une mise à jour si besoin. Consulter le manuel du produit
pour les directives complètes.
Achten Sie darauf, dass die neueste Firmware installiert ist. Führen Sie ggf. ein Update durch. Eine vollständige Anleitung finden
Sie im Benutzerhandbuch.
Verifique que esté utilizando la versión de firmware más reciente y, en caso contrario, actualícela. Consulte la Guía del pro-
ducto para obtener instrucciones detalladas.
Assicurasi che la versione più recente del firmware venga aggiornata ed eseguita se necessario. Per le istruzioni complete con-
sultare la guida al prodotto.
Controleer of de nieuwste firmware draait en pas dit indien nodig aan. Raadpleeg de producthandleiding voor de volledige
instructies.
最新のファームウェアが実行されていることを確認してください。 必要に応じてアップデートを行ってください。 詳細な手順については、 製品ガイ
ドを参照してください。
确保运行最新固件,并在必要时更新。请参见《产品指南》以获取完整说明。
E Data Enabler Pro Product Guide: www.colorkinetics.com/ls/pds/dataenablerpro/
PUB-000251-00 R04
Die Beleuchtungskörper sind von einem qualifizierten Elektriker in
Übereinstimmung mit allen geltenden Vorschriften zu installieren.
Las lámparas deben ser instaladas por un electricista calificado y
cumpliendo todas las normas y regulaciones, tanto nacionales como
locales, sobre instalaciones eléctricas y obras.
I gruppi di illuminazione devono essere installati da un elettricista
qualificato in conformità con le norme locali e nazionali vigenti in
materia di costruzioni edilizie e installazione di impianti elettrici.
E www.colorkinetics.com/support
8 mm hex
Installation Instructions
Instrucciones de instalación
Istruzioni per l'installazione
Armaturen moeten worden aangebracht door een gekwalificeerde
elektricien en in overeenstemming met alle nationale en plaatselijke
elektriciteits- en bouwvoorschriften.
フィクスチャの設置は、 資格を持つ電気技術者が行ってください。 そ
の際、 国および地域の電気、 建築関連の法令および規則をすべて遵
守してください。
必须由合乎所有国家和当地电器与建筑法规及规定的合格电工安
装灯具
3 mm hex
Instructions d'installation
Installationsanweisungen
Installatie-instructies
インストール手順
安装指示

Werbung

loading

Inhaltszusammenfassung für Philips Data Enabler Pro

  • Seite 1 Assicurasi che la versione più recente del firmware venga aggiornata ed eseguita se necessario. Per le istruzioni complete con- sultare la guida al prodotto. Controleer of de nieuwste firmware draait en pas dit indien nodig aan. Raadpleeg de producthandleiding voor de volledige instructies. 最新のファームウェアが実行されていることを確認してください。 必要に応じてアップデートを行ってください。 詳細な手順については、 製品ガイ ドを参照してください。 确保运行最新固件,并在必要时更新。请参见《产品指南》以获取完整说明。 E Data Enabler Pro Product Guide: www.colorkinetics.com/ls/pds/dataenablerpro/ PUB-000251-00 R04...
  • Seite 2: Installation Planning

    Informationen zum Einbau, einschließlich elektrischer Verkabelung und Datenleitungskonfiguration, entnehmen Sie dem Benutzerhandbuch für den Data Enabler Pro. Consulte la Guía del producto de Data Enabler Pro para obtener más información sobre la planificación de la instalación, incluidas las pautas sobre configuración de datos y electricidad.
  • Seite 3: Permanent Installation

    Accepts PG13.5 Accepts PG21 5.4 in 8.7 in 138 mm 267 mm Data Enabler Pro Data Enabler Pro r r 3.4 in DESIGNED AND DEVELOPED IN THE USA. DESIGNEDAND DEVELOPED IN THE USA. MADE IN CHINA. MADE IN CHINA. www. colorkinetics.com www colorkinetics.com...
  • Seite 4 Data Enabler Pro Installation Instructions 3 mm hex Remove cover and appropriate seal plugs Retirez le couvercle et les raccords d’étanchéité appropriés Abdeckung entfernen und Stecker benetzen Quite la cubierta y los tapones herméticos que correspondan Rimuovere il coperchio e i tappi di tenuta appropriati Verwijder het deksel en de toepasselijke afdichtpluggen カバーと必要なシールプラグを外す...
  • Seite 5 Data Enabler Pro Installation Instructions Connect data – DMX Brancher Données – DMX Verbinden Daten – DMX Conecte cables de Datos – DMX Effettuare il collegamento Dati – DMX Verbinden Data – DMX 接続 データ – DMX 连接数据 – DMX 22 –...
  • Seite 6 Data Enabler Pro Installation Instructions Connect data – Ethernet Brancher Données – Ethernet Verbinden Daten – Ethernet Conecte cables de Datos – Ethernet Effettuare il collegamento Dati – Ethernet Verbinden Data – ethernet 接続 データ – Ethernet 连接数据 – 以太网...
  • Seite 7 Data Enabler Pro Installation Instructions Attach power cable Fixez le câble d’alimentation Schließen Sie das Netzkabel an Conecte el cable de alimentación Collegare il cavo di alimentazione Sluit stroomsnoer aan 電源ケーブルを接続します。 连接电缆 8 – 18 AWG (8,37 – 0,823 mm ) toronné/massif...
  • Seite 8 Data Enabler Pro Installation Instructions Connect fixture cable Branchez le câble de l’appareil Schließen Sie das Vorrichtungskabel an Conecte el cable de la lámpara. Collegare il cavo del gruppo di illuminazione Sluit de armatuurkabel aan フィクスチャのケーブルを接続します。 连接灯具电线 8 – 18 AWG 8 –...
  • Seite 9: Turn The Power On

    Data Enabler Pro Installation Instructions Connect fixture cable – iColor Accent Powercore Branchez le câble de l’appareil Schließen Sie das Vorrichtungskabel an Conecte el cable de la lámpara. Collegare il cavo del gruppo di illuminazione Sluit de armatuurkabel aan フィクスチャのケーブルを接続します。...
  • Seite 10 -40° – 176° F (-40° – 80° C) Storage Humidity 0 – 95%, non-condensing Cooling Convection Heat Dissipation 20 W Philips full range of controllers, third-party DMX controllers, or KiNET-compatible‡ third-party Data Input Source Ethernet controllers Certification UL / cUL, FCC Class A, CE Certification and Safety Environment...
  • Seite 11 Data Enabler Pro Installation Instructions Do not attempt to install or use a fixture until you It is the end user’s responsibility to use the Do not hot swap fixtures. Ensure that power to read and understand the installation instructions and...
  • Seite 12 DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore Tel 888.385.5742 are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in Tel 617.423.9999 the United States and / or other countries. All other brand or product names are trademarks Fax 617.423.9998...