Hand Guard - Bosch PWS 10-125 CE Bedienungsanleitung

Press the protection guard onto the spindle collar
until the collar of the protection guard faces
against the flange of the machine and the encod-
ing keys engage in the circular groove at the spin-
dle collar.
6
Rotate the protection guard 6 in clockwise direc-
tion to the required position (working position).
Adjust the protection guard 6 in such a man-
ner that sparks are not emitted in the direc-
tion of the operator.
Note: Encoding keys on the protection guard 6
ensure that only a protection guard that fits the
machine type can be mounted.
Disassemble in the reverse sequence.
17 • 1 609 929 F15 • TMS • 03.06.03
6
7
7
English - 4
Vibration-dampening Auxiliary Handle
The vibration-dampening auxiliary handle re-
duces the vibrations, making operation more
comfortable and secure.
Do not make any alterations to the aux-
iliary handle.
Do not continue to use an auxiliary handle if it is
damaged.
For all work with the machine, the auxiliary
handle 3 must be mounted.
Screw the auxiliary handle 3 on the right or left of
the machine head depending on the working
method.

Hand Guard

For work with the rubber sanding pad 13 or with
the cup brush 16/disc brush/flap disc, mounting
the hand guard 12 (accessory) is recommended.
The hand guard 12 is fastened with the auxiliary
handle 3.
Mounting the Grinding Tools
Before any work on the machine itself, pull
the mains plug.
Use only grinding tools with a permissi-
ble speed at least as high as the no-load
speed of the machine.
Grinding and cutting discs become very
hot while working; do not touch until
they have cooled.
Clean the grinder spindle and all parts to be
mounted. For clamping and loosening the
grinding tools, lock the grinder spindle 5 with
the spindle lock button 4.
Actuate the spindle lock button 4 only when
the grinder spindle is at a standstill!