Operation - ULTIMATE SPEED UAWSB 2 B1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Safety instructions / Operation
clamp
terminal ("+") of the battery�
Only connect the black quick
contact connection clamp
the negative terminal ("-") of the
battery�
Only touch the quick connection
„
clamps
lated area!
Attention:
Avoid damage to property
from improper use!
Use the device only with the
„
original parts it was delivered
with!
Keep the contact surfaces of the
„
battery free of dust and lubri-
cants� If necessary, clean the
contact surfaces with a clean
cloth�
z Operation
First connect the red quick contact
„
connection clamp
terminal ("+") of the battery�
Then connect the black quick contact
„
connection clamp
terminal ("-") of the battery�
The device can be attached to the vehicle
„
chassis during the measurement process
using the magnetic strips
of the device�
8
to the positive
3
and
3
3
4
GB/CY
in the insu-
4
to the positive
to the negative
2 on the back
to
4