ELGA VEOLIA PURELAB Chorus 3 Bedienungsanleitung Seite 6

SET - UP
1b
MODULAR STACKING, RESERVOIR UNDERNEATH
a. Screw down the reservoir plate.
2
CONNECT THE WATER (PORT No. 1)
a. Remove the transit plugs from the water
inlet connection.
3
CONNECT THE DRAIN (PORT No.3)
a. Remove the transit plugs from the water
outlet connection.
b. Place on top of reservoir, line up with
bolt heads. Screw in joining bolt.
b. Using the tube supplied, firmly push one end
securely into the water connector.
CAUTION!
Ensure drain pipe is not in waste water.
b. Using the tube supplied, firmly push one end
securely into the water connector.