ELGA VEOLIA Purelab Chorus 2 Bedienungsanleitung Seite 9

SET - UP
7
REMOVING THE BYPASS PACK LC233
Bypass LC233.
a. Open right hand door.
d. Insert Purifi cation pack and turn handle.
8
CONNECT THE POWER (NO.6 PORT)
a. Connect the power cable
as shown 1-2-3.
b. Only use the power supply
®
supplied by ELGA .
The power supply must be earthed.
WARNING!
ONLY USE THE APPLIANCE
COUPLER (MAINS LEAD) AND
POWER SUPPLY PROVIDED.
IF THE EQUIMENT IS USED IN A
MANNER NOT SPECIFIED BY
ELGA,THE PROTECTION
PROVIDED BY THE EQUIPMENT
MAY BE IMPAIRED.
POSITION THE POWER SUPPLY
SO THAT IT CANNOT COME
INTO CONTACT WITH WATER.
b. Remove Bypass LC233.
e. Make sure it's secure.
3
2
c. Remove Purifi cation pack transit plugs
1