Aux Input; Usb Connection; Cd Playback - auna Vertico Swing DAB Bedienungsanleitung

EN
40

AUX INPUT

In "AUX IN" mode, audio signals are played back from an external source
connected via an audio cable, e.g. from an MP3 player. To play back audio
signals via the "AUX IN" mode:
1. First turn down the volume on the radio. Then connect the external
audio source to the AUX-In 3.5 mm stereo jack.
2. Press the "MODE" button until "AUX in" appears in the display.
3. Now adjust the volume of the radio (and, if necessary, the volume of the
audio source device).

USB CONNECTION

1. Press the "MODE" button until the display shows "USB" to play music
from a USB stick.
2. Insert the USB stick into the USB port and the unit automatically starts
playing the first track on the USB stick.
3. Use the "Backward" button or the "Forward" button to play the previous
or next track.
4. The file name is shown on the display.
NOTE: The USB port does not support device charging or data transfer from
a computer.

CD PLAYBACK

1. Press the "MODE" button until the display shows "CD" to play music
from a CD.
2. The radio display will now show "Reading..." followed by "No disc".
3. Press the "Eject" button on the device or on the remote control to open
the CD compartment. Insert the CD into the tray and press the "Eject"
button again. The CD compartment closes again and the first track on
the CD is now played.
CD functions
• To jump between titles, use the "Backward" button or the "Forward"
button on the unit or on the remote control
• Play and pause the music by pressing the "Play/pause" button on the
unit or on the remote control.