Dab+ Radio - auna Vertico Swing DAB Bedienungsanleitung

DAB+ RADIO

• DAB mode is automatically selected and when the radio is connected
to the power supply for the first time, the radio performs a full scan. The
display shows "Scanning" and a bar indicating the progress of the scan
and the total number of stations found so far.
• When the search is finished, the radio plays the first alphanumeric
station found. Set the volume to the desired value using the "VOL +" and
"VOL -" buttons.
Channel list
1. In DAB mode, press the "MENU" button to enter the DAB menu.
2. Press the "Backward" button or the "Forward" button to select the
channel list, and then press the "OK" button to confirm.
3. A list of DAB stations is shown on the display. Once you have found the
desired station, press the "OK" button to select the station.
Full channel scan
This function allows the radio to search for all DAB stations in your area.
• In DAB mode, press the "MENU" button to enter the DAB menu. Press
the "Backward" button or the "Forward" button to select "Full Scan",
press the "OK" button to start the full scan.
Manual station selection
With this function, a specific station or a new station can be added manually
to the stations already available on the radio.
1. In DAB mode, press and hold the "MENU" button to enter the DAB menu
and press the "Backward" button or the "Forward" button to select
"Manual tune". Press the "OK" button to confirm the selection.
2. Press the "Backward" button or the "Forward" button until the desired
frequency is shown in the display and then press the "OK" button.
The frequency and the name of the radio station as well as the signal
strength are shown in the display.
3. Press the "OK" button again to add the radio station to the station list
and start it automatically.
EN
35